ABOVE
Extremely nice genuine Emco machine vice on removable rotating base. 110mm wide jaws that open to 109mm and are 31mm deep. base plate is 157mm x 118mm. Vice is 72mm tall, and 98mm tall with the base attached.
ABOVE
Stunning condition genuine Emco MT2 boring head. Looks unsed to me. Quite a rare item and highly desirable.
ABOVE
Excellent top quality Schaublin MT2 collet chuck and 7 Schaublin collets. Collets include: 3-4mm (1/8" to 5/32"), 4-5mm (3/16" to 11/64"), 6-7mm (1/4" to 17/64"), 7-8mm (5/16" to 9/32"), 9-10mm (23/64" to 25/64"), 11-12mm (7/16" to 15/32") and one German collet that is 12-13mm (31/64" to 1/2"). Highly desirable. Needs a spanner and bar, but expect I have the material for a bar.
ABOVE
Excellent condition genuine Emco T slotted angle plate. T slotted face is 175mm x 139mm and the base is 144mm x 139mm with 4 fixing holes.
ABOVE
Excellent condition MT2 circular saw arbor also believed to have come from the Emco supplier.
A really nice and clean example of an Emco FB2 milling machine for sale. A great size without being too big ! This is one of the best all round hobbiest mills out there, an ideal partner to the Myford lathe. This is an imperial mill. Privately owned it looks to have been very well looked after. The table is also very clean with no overmilling marks except an extremely minor touch to an edge of a T slot, but difficult to photograph as so minor.
Comes mounted on an original Emco, very strong, drip try and cabinet. Cabinet has it's key. This tray also makes it easy to transport with little/no chance of it tipping over. Will also fit into most cars.
Table size is 160mm x 150mm with a 2MT spindle.
Has a throat of 163mm. Quill stroke is 40mm.
Single phase motor with 6 speeds.
An extremely good example.
We also have an excellent selection of 2MT tooling, machine vices, collets sets, rotary tables, angle plates, boring heads, milling cutters, etc, all of which can be purchased seperately. Shown above are the Emco items likely to be of interest to be purchased seperately. Other items available, some can been seen under the "Milling Accessories" menu option.
Price: £ 4,250 to include the Emco drip tray & cabinet. (no additional VAT to
add)
Click here to see other available
lathes
Call Howard on 01225 812155 or 07753 610420
Alternatively email: sales@myford-lathes.com
Home
Page | About
Us | Contact us | Customer
Services
